Mower series / SCAG
SCAG V-Ride II
The SCAG V-Ride II is a stand-on mower for commercial mowing, with 32, 36, 48, 52 and 61-inch decks. Engines from three makers run 16 to 40 hp, through dual pump-and-motor drives. The 48-inch and up use a Velocity Plus tri-plate deck. At J5 Tractors, our Navasota store sells SCAG mowers.

At a glance
stand-on · 5 models: 32 in, 36 in, 48 in, 52 in and 61 in
- Deck size
- 32-61 in
- Engine
- Kawasaki FX or FT, Kohler Command PRO or Vanguard
- Engine horsepower
- 16-40 hp
- Transmission
- Dual pump and motor, Hydro-Gear pumps and Parker motors
- Top speed
- 8.5-10.5 mph
- Cutting height
- 1.5-4.5 in
- Fuel capacity
- 5-8 gal
- Weight
- 818-1,173 lb
Sold at Navasota. Best for landscape crews, backyards behind narrow gates, big properties from several acres on up.
Every model, side by side
| Specification | 32 in | 36 in | 48 in | 52 in | 61 in |
|---|---|---|---|---|---|
| Engine | |||||
| Engine | Kawasaki FX or Vanguard | Kawasaki FX or Vanguard | Kawasaki FX or FT EFI, or Kohler Command PRO | Kawasaki FX or FT EFI, Kohler Command PRO EFI or Vanguard Big Block EFI | Kohler Command PRO EFI, Kawasaki FT or FX EFI, or Vanguard Big Block EFI |
| Engine horsepower | 16-23 hp | 19-23 hp | 22-26 hp | 23-37 hp | 26-40 hp |
| Fuel capacity | 5 gal | 6.75 gal | 8 gal | 8 gal | 8 gal |
| Deck | |||||
| Deck size | 32 in | 36 in | 48 in | 52 in | 61 in |
| Deck construction | Advantage dual-plate | Advantage tri-plate | Velocity Plus tri-plate, 3 steel plates (nearly 1/2 in total) | Velocity Plus tri-plate, 3 steel plates (nearly 1/2 in total) | Velocity Plus tri-plate, 3 steel plates (nearly 1/2 in total) |
| Cutting height | 1.5-4.5 in | 1.5-4.5 in | 1.5-4.5 in | 1.5-4.5 in | 1.5-4.5 in |
| Drive | |||||
| Transmission | Dual pump and motor: Hydro-Gear 10 cc pumps, Parker 12 ci motors | Dual pump and motor: Hydro-Gear 10 cc pumps, Parker 12 ci motors | Dual pump and motor: Hydro-Gear 12 cc pumps, Parker 14 ci motors | Dual pump and motor: Hydro-Gear 12 cc pumps, Parker 14 ci motors | Dual pump and motor: Hydro-Gear 12 cc pumps, Parker 14 ci motors |
| Top speed (forward) | 8.5 mph | 8.5 mph | 10.5 mph | 10.5 mph | 10.5 mph |
| Top speed (reverse) | 5 mph | 5 mph | 5 mph | 5 mph | 5 mph |
| Size | |||||
| Front tires | 11 x 4-5 in | 11 x 4-5 in | 13 x 5-6 in | 13 x 5-6 in | 13 x 6.5-6 in |
| Rear tires | 20 x 6.5-10 in | 20 x 8-10 in | 24 x 9.5-12 in | 24 x 9.5-12 in | 24 x 12-12 in |
| Width (deck out) | 43 in | 47.75 in | 61.25 in | 65.25 in | 73.5 in |
| Weight | 818 lb | 832 lb | 1,015 lb | 1,000-1,022 lb | 1,127-1,173 lb |
| Comfort | |||||
| Seat | Extra-large comfort cushion | Extra-large comfort cushion | Extra-large comfort cushion | Extra-large comfort cushion | Extra-large comfort cushion |
| Current pricing | See V-Ride II 32 in pricing | See V-Ride II 36 in pricing | See V-Ride II 48 in pricing | See V-Ride II 52 in pricing | See V-Ride II 61 in pricing |
All specifications on this page were taken directly from SCAG, the manufacturer. Figures from SCAG V-Ride II specifications, checked November 2, 2026: SCAG V-Ride II specifications. The OEM spec table says tri-plate decks throughout and that the 32 in model features dual-plate; the 36 in column is therefore tri-plate by that statement.
Small frame or big frame
This stand-on comes in two sizes of machine. The 32 and 36-inch models run Hydro-Gear 10 cc pumps with Parker 12 ci motors, and top out at 8.5 mph. They weigh 818 and 832 lb. With the deck out, they're 43 and 47.75 inches wide.
From 48 inches up, the pumps grow to 12 cc and the Parker motors to 14 ci. Top speed climbs to 10.5 mph. Weight runs from 1,000 to 1,173 lb, and the 61 measures 73.5 inches wide. Reverse is 5 mph across the range.
Power follows the same split. The small pair runs a Kawasaki FX or a Vanguard at 16 to 23 hp. The 48 and 52 run 22 to 26 and 23 to 37 hp. The 61 tops the range at 26 to 40 hp, with EFI engines from Kohler, Kawasaki and Vanguard.
Why crews stand to mow
A stand-on lets you step off to open a gate or move a limb, then step right back on. If you mow for a living, that adds up across a day. A crew cutting a string of small yards feels it most.
Decks differ by size. The 32-inch is an Advantage dual-plate and the 36-inch an Advantage tri-plate. From 48 inches, it's SCAG's Velocity Plus tri-plate, nearly half an inch of steel in total. Cutting height runs 1.5 to 4.5 inches on all five.
At 43 inches, the 32-inch slips through gates the wider decks can't. That's the one for fenced backyards. Fuel runs from 5 gallons on the 32 to 8 gallons from 48 inches up. Need a wider deck and more cutting height? Look at the V-Ride XL.
Looking for pricing?
Current pricing is on our live inventory page at j5tractors.com, where our Navasota stores list the SCAG mowers they have. Check the 32 in, 36 in, 48 in, 52 in and 61 in there, then call the store to see one.
Financing
Financing for the SCAG V-Ride II starts with our easy online credit application. It works for new and pre-owned machines.
Reach out to our sales team
- Bryan LathamNavasota store(936) 825-8722
Store page: Navasota
Questions people ask
How narrow is the 32-inch SCAG V-Ride II?
It's 43 inches wide with the deck out. It weighs 818 lb and runs a Kawasaki FX or Vanguard engine at 16 to 23 hp. If you're mowing backyards behind narrow gates, it's the one you'll want to measure first.
What engines does a 61-inch SCAG V-Ride II offer?
You can pick a Kohler Command PRO EFI, a Kawasaki FT or FX EFI, or a Vanguard Big Block EFI. They're rated 26 to 40 hp. That model carries 8 gallons of fuel and tops out at 10.5 mph, so it's ready for big ground.
What deck does SCAG put on the V-Ride II?
That depends on size. The 32-inch has an Advantage dual-plate deck and the 36-inch an Advantage tri-plate. The 48, 52 and 61 get the Velocity Plus tri-plate, three steel plates nearly half an inch thick in total. You'll get 1.5 to 4.5 inches of cutting height on each.
How much does a SCAG V-Ride II mower cost?
We keep current pricing on our live inventory page at j5tractors.com, where our Navasota stores list the SCAG mowers they have. Pricing depends on the model and how it's equipped, so check the listing for the 32 in, 36 in, 48 in, 52 in and 61 in. If the one you want isn't listed, call the store.





