Zero-Turn Mower Dealer in Hearne, TX

Start with what you'll be cutting. A small yard doesn't need the same deck as a few acres of pasture edges. Look at deck size and how tight the machine turns around trees and posts. Check the operator's manual for the slope limit before you ever take a zero-turn mower up a grade — that number matters more than horsepower. Our Bryan store carries zero-turn mowers built for a range of property sizes. Call the store and ask what fits your ground, or browse our zero-turn mowers on j5tractors.com.

It usually takes a few passes, and it feels twitchy at first. Two levers do the steering instead of a wheel. Push both forward and it runs straight. Ease one back and it turns toward that side. Push one forward and pull the other back, and it pivots in place. Start on flat, open ground at low speed. Then work in close around trees and posts. On a grade, slow down and go by the slope limit listed in the operator's manual. Come by our Bryan store and sit on one to feel the levers for yourself.

Rough or uneven ground is fine for a zero-turn mower, up to a point. Ruts, stumps and uneven patches are normal wear on pasture edges. The deck and tires are built to ride over that kind of ground. What it's not built for is a steep grade. Keep that in mind. The direction to mow a slope depends on the machine, so go by its operator's manual. Bad Boy's manual says mow up and down slopes, not across. The operator's manual gives the slope limit for your machine. That's the number to go by, not a guess. Stay well back from ditch banks and drop-offs too. For the roughest, steepest spots, a walk-behind push mower is the safer tool. Ask our Bryan store what fits your acreage.

Often, yes. A push mower is still the right tool for tight spots a bigger deck can't reach — around flower beds, fence corners, or a septic field. On a steep grade, it's the safer tool. A zero-turn covers the open stretch of yard in fewer passes. Plenty of properties use both machines: one for the edges, one for the open ground. Our Bryan store sells Bad Boy mowers. Stop by and look them over, or check the inventory to see what's listed before you come in.

Look at hours on the meter first — that tells you more than the model year. Check the deck for rust-through. Look at the blades and spindles. Ask about the belts too. A used zero-turn with low hours and a clean deck can still have plenty of life left in it. Our Bryan store carries used equipment alongside new. What's on the lot changes often. The best way to know what's there is to come look or call ahead. If you've got a mower to trade in, our store sets its value. That value can go toward a down payment on something else.